Researchers have created a new method to more efficiently convert potato waste into ethanol. The findings may lead to reduced production costs for biofuel in the future and add extra value for chip makers.
Using potato mash made from the peelings and potato residuals from a Pennsylvania food-processing company, researchers triggered simultaneous saccharification—the process of breaking down the complex carbohydrate starch into simple sugars—and fermentation—the process in which sugars are converted to ethanol by yeasts or other microorganisms in bioreactors.
The simultaneous nature of the process was innovative, according to researcher Ali Demirci, professor of agricultural and biological engineering at Penn State. The addition to the bioreactor of mold and yeast—Aspergillus niger and Saccharomyces cerevisiae, respectively—catalyzed the conversion of potato waste to bioethanol.
The bioreactor had plastic composite supports to encourage and enhance biofilm formation and to increase the microbial population. Biofilms are a natural way of immobilizing microbial cells on a solid support material. In a biofilm environment, microbial cells are abundant and more resistant to environmental stress causing higher productivities.
In this application, these benefits were especially important because mold enzyme activity required higher temperature and the yeast had to tolerate this.
Researchers evaluated the effects of temperature, pH and aeration rates in biofilm reactors, and the optimal conditions were found to be 95 degrees Fahrenheit and a pH of 5.8 with no aeration. After 72 hours, the researchers achieved the maximum ethanol concentration of 37.93 grams per liter. The yield was 0.41 grams or ethanol per gram of starch.
“These results are promising, because the co-culture biofilm reactor provided similar ethanol production—37.93 grams per leader—compared to the conventional ethanol production—37.05 grams per liter—which required pre-treatment with added commercial enzymes at a higher temperature,” Demirci explains. “Therefore, eliminating the externally added enzyme and energy costs will certainly reduce the cost of bioethanol production.”
Researchers also evaluated biofilm formation of co-culture on the plastic composite supports using a scanning electron microscope, says researcher Gulten Izmirlioglu, a doctoral student in agricultural and biological engineering when the study took place.
“Scanning electron microscope images revealed that when mold and yeast are allowed to form a biofilm, hyphae (filaments) of the mold provide surface area for the yeasts’ attachment,” she says. “That’s a good thing.”
Izmirlioglu believes the findings, published in the journal Fuel, are significant for industry.
“Overall, bioethanol production from starchy industrial wastes can be improved with application of biofilm reactors, while the production cost is reduced with integrations of the simultaneous saccharification and fermentation process and co-culturing,” she says.
More efficient bioethanol production is needed to meet the demand for renewable energy and reduce the negative environmental impacts of petroleum fuel, Demirci notes.
To make ethanol production cost-competitive, inexpensive, and easily available, feedstocks such as potato mash are needed, as well as improved processing technologies with higher productivities.
“Industrial food wastes are potentially a great substrate in production of value-added products to reduce the cost, while managing the waste economically and environmentally,” says Demirci.
The Turkish Ministry of Education, by providing a scholarship to Izmirlioglu, and the Pennsylvania Agricultural Experiment Station supported this work.
This article was originally published on Futurity. Read the original article.
Source: Penn State
Original Study DOI: 10.1016/j.fuel.2016.05.047
