The new structure has high mobility of Na+ ions and a robust framework.
Image: Nature Communications

With the demand for hand-held electronics at an all-time high, the costs of the materials used to make them are also rising. That includes materials used to make lithium batteries, which is a cause for concern when projecting the development of large-scale grid storage.

In order to find an alternative solution to the high material costs connected with lithium batteries, the researchers at the Australian Nuclear Science and Technology Organisation (ANSTO) and the Institute of Physics at the Chinese Academy of Science in Beijing have begun focusing their attention on sodium-ion batteries.

The science around sodium-ion batteries dates back to the 1980s, but the technology never took off due to resulting low energy densities and short life cycles.

However, the new research looks to combat those issues by improving the properties of a class of electrode materials by manipulating their electron structure in the sodium-ion battery.

(more…)

Researcher from Stanford University have developed a new device that has made water-splitting more practical and boosted efficiency levels to an unprecedented 82 percent.

With just one catalyst, the novel water-splitting device can continuously generate hydrogen and oxygen for more than 200 hours with a steady input of just 1.5 volts of electricity.

Through this new device, researchers can produce renewable sources of clean-burning hydrogen fuel.

The Stanford researchers are using just one catalyst instead of the traditional two in water-splitting processes, which allows the cost to drop significantly.

“For practical water splitting, an expensive barrier is needed to separate the two electrolytes, adding to the cost of the device. But our single-catalyst water splitter operates efficiently in one electrolyte with a uniform pH,” said Haotian Wang, lead author of the study and graduate student at Stanford.

(more…)

Alvin J. Salkind in an undated photo.

“My nature is curiosity and The Electrochemical Society has gone a long way to satisfy my curiosity…” — A. Salkind

About two years ago, ECS began a conversation with Prof. Salkind about his proposal for a revised edition of Alkaline Storage Batteries. In the proposal we presented to John A. Wiley & Sons (our partner in publishing monographs), I said it was from “one of the ECS ‘giants’.”

That was quite true about Dr. Salkind. When I first met him (and ever after), I was engaged by his tremendous intellect, his wide-ranging curiosity, and his still being very much involved with his science.

Prof. Salkind was an emeritus member of ECS, having joined in 1952 as a student. He served the Society very well — as a Chair of our Battery Division and on an innovative committee called the New Technology Subcommittee. He became an ECS Fellow only in 2014, but over the course of his many years of involvement with ECS, he organized symposia, edited proceedings volumes, and chaired many committees.

Cover of the Alkaline Storage Batteries book from 1969

In conjunction with developing a new edition of the Alkaline Storage Batteries book, Prof. Salkind began visiting ECS headquarters. We were immediately drawn in by his still-vibrant enthusiasm for the field and his fascinating anecdotes about other ECS notables in the field: Vladimir Bagotsky, Ernest Yeager, and Vittorio de Nora, among others. He was always willing to teach and to share. We were very fortunate to be able to “capture” Prof. Salkind in a very recent interview at the HQ office.

(Listen to it as a podcast. Watch the video.)

Professor Salkind generously considered ECS his technological home and brought his important monograph to be published by ECS. ECS is grateful to Dr. Salkind for his years of service to the Society and his contributions to the entire battery community; and we thank his family for supporting this remarkable person and sharing him with ECS.

The new arrangement of photovoltaic materials includes bundles of polymer donors (green rods) and neatly organized fullerene acceptors (purple, tan).
Image: UCLA

A team of UCLA scientists are delivering good news on the solar energy front with the development of their new energy storage technology that could change the way scientists think about solar cell design.

Taking a little inspiration from the naturally occurring process of photosynthesis, the researchers devised a new arrangement of solar cell ingredients to make a more efficient cell.

“In photosynthesis, plants that are exposed to sunlight use carefully organized nanoscale structures within their cells to rapidly separate charges — pulling electrons away from the positively charged molecule that is left behind, and keeping positive and negative charges separated. That separation is the key to making the process so efficient,” said Sarah Tolbert, senior author of this research and published ECS author.

PS: Check out Tolbert’s recently published open access paper in the Journal of The Electrochemical Society entitled, “The Development of Pseudocapacitive Properties in Nanosized-MoO₂.”

The currently dilemma in solar cell design revolves around developing a product that is both efficient and affordable. While conventional silicon works rather well, it is too expensive to be practical on a large scale. More engineers and researchers have been moving to replace silicon with plastic, but that leads to efficiency levels taking a hit.

(more…)

Beth Schademann, ECS’s Publications Specialist, recently came across a Huffington Post article detailing some life-saving innovations in water purification.

A simple bag called the Fieldtrate Lite has made its way to isolated communities that lack clean water in an effort to save lives through improved sanitation.

The water filtering bag is a development of Singapore’s WateROAM, who specialize in portable water filtration systems. The Fieldtrate Lite filters dirty water though membranes, turning it into potable water in a very short period of time. The bag is specifically appealing for disaster relief operations and rural communities without access to clean water.

“Our vision is to build a world where no man shall face prolonged thirst,” said David Pong, WateROAM’s chief executive.

(more…)

PNNL scientist Jian Zhi Hu shows a tiny experimental battery mounted in NMR apparatus.
Image: PNNL

While working on a unique lithium-germanide battery, Pacific Northwest National Laboratory (PNNL) researchers knew something was happening inside the battery to dramatically increase its energy storage capacity, but they couldn’t see it. With no way to analyze the reaction occurring, the researchers could not understand the process. In order to solve the problem, the researchers developed a novel nuclear magnetic resonance (NMR) technique to allow insight and understanding of the electrochemical reactions taking place in the battery. Essentially, they have developed an NMR “camera.”

In the end, this leaves the scientists with not only a novel lithium-germanide battery with a distinctly high energy density, but also an NMR device that can be used to examine reactions as they happen inside the battery.

This from PNNL:

By using the NMR process to look inside the battery and observe this reaction as it happened, the scientists found a way to protect the germanium from expanding and becoming ineffective after it takes on lithium. The secret proved to be forming the germanium into tiny “wires” and encasing them in small, protective carbon tubes to limit the expansion. This technique significantly stabilizes battery performance. Without embedding germanium in carbon tubes, a battery performs well for a few charging-discharging cycles, but fades rapidly after that. Using the “core-shell” structure, however, the battery can be discharged and charged thousands of times.

(more…)

Can the United States convert to 100 percent clean, renewable energy by 2050? Stanford University’s Mark Z. Jacobson and U.C. Berkeley’s Mark Delucchi certainly think so. In fact, they’ve laid out a very comprehensive plan to do just that.

The two researchers have recently published a study detailing the viability of the U.S. converting to 100 percent green energy. They’re calling for aggressive changes in both infrastructure and energy consumption on a state-by-state level to achieve this goal. The new study shows that this transition from fossil fuels to renewable resources is not only technically possible with already existing technologies, but it’s also economically feasible.

“The main barriers are social, political and getting industries to change. One way to overcome the barriers is to inform people about what is possible,” Jacobson said. “By showing that it’s technologically and economically possible, this study could reduce the barriers to a large scale transformation.”

(more…)

Recently, scientists have been looking at the Japanese paper-folding art of origami as inspiration for novel flexible energy-storage technologies. While there have been breakthroughs in battery flexibility, there has yet to be a successful development of stretchable batteries. Now, researchers from Arizona State University have unveiled a way to make batteries stretch, yielding big potential outcomes for wearable electronics.

The Arizona State University research team includes ECS member and advisor of the ECS Valley of the Sun student chapter, Candace K. Chan. Chan and the rest of the team were inspired by a variation of origami called kirigami when developing this new generation of lithium-ion batteries.

According to the researchers, the new battery can be stretched more than 150 percent of its original size and still maintain full functionality.

Small-scale device provides easy “plug-and-play” testing of molecules and materials for artificial photosynthesis and fuel cell technologies.
Image: Joint Center for Artificial Photosynthesis

Scientists have developed a small-scale device that can aid in the advancement of artificial photosynthesis and fuel cell technologies.

The new device provides an easy “plug-and-play” microfluidic test-bed to evaluate materials for electrochemical energy conversion systems. Researchers will now be able to test small amounts of molecules and materials before producing a full-scale device to insure new devices will provide high energy density.

Sophia Haussener and Joel Ager, published ECS authors and past members, were two of the researchers that worked on the project for the U.S. Department of Energy. (Check out Haussener’s past research on photoelectrochemical water-splitting and Ager’s work in electron diffraction.)

This from U.S. Department of Energy:

As all functional components in this microfluidic test-bed can be easily exchanged, the performance of various components in the integrated system can be quickly assessed and tailored for optimization. The initial experiments and modeling were performed for water electrolysis; however, the system can be readily adapted to study proposed artificial photosynthesis and fuel cell technologies.

Read the full article here.

The researchers believe that this technology will be easily adaptable to other technologies, such as solar-fuel generators. Development of such devices may significantly accelerate due to the new ability to assess performance at an early stage.

Wind energy has seen a lot of positive momentum over the past few years in a global effort to help facilitate change in the energy infrastructure. With over $100 billion invested in wind energy in 2014 alone, this technology is one of the fastest growing sectors in the world. Today we’re celebrating Global Wind Day by looking at the innovation that has happened in this sector and taking a peek at what is yet to come.

Over the years, wind energy has seen some dramatic changes. In the 1980s, California was the hub of all wind energy with 90 percent of the world’s installed wind energy capacity. Now, countries such as China, Germany, Spain, India, and the United States have all shifted a substantial percentage of energy needs toward wind. In just a short 12-year period between 2000 and 2012, wind energy has increased over 16 times to more than 282,000 MW of operating wind capacity.

Scientists across the globe are continuing to tap into this technology in order to produce higher efficiency levels at lower price points. Take a look at the work some of our scientists are doing in the sector:

• “Integrating Wind And Solar With Hydrogen Producing Fuel Cells“
• “The Cost of Hydrogen Production from Wind Energy“
• “The Application of Valve-Regulated Lead Acid Batteries to Wind Power Generation Systems“
• “Fuel Cells And Hydrogen For Smart Grid“

(more…)