Cellphones have changed the way the world communicates, but one bar owner is looking to revert to a more classic type of interpersonal communication – if only for one drink.

Looking to give his customers a little encouragement to take their eyes off the electronic screens, bar owner Steven Tyler of East Sussex’s Gin Tub installed metal mesh in the bar’s ceiling and walls. By doing this, all electromagnetic signals are absorbed and redistributed – successfully preventing them from entering the building and preventing patrons from accessing the internet and social media feeds.

This process – known as a Faraday Cage – is derived from Michael Faraday’s 1836 discovery used to prevent interference between electronic equipment in highly charged environments.

Unlike signal jammers, a Faraday Cage is completely legal.

“Unlike jammers, Faraday cages don’t proactively cause interference, although they do interfere with mobile reception,” said a spokesman from Ofcom, the communications regulator in the UK.

While some worry that the Faraday Cage could alienated younger bar-goers, Tyler believes it’s a necessary measure in a world so addicted to digital communication.

“I just wanted people to enjoy a night out in my bar, without being interrupted by their phones,” Tyler told BBC. “So rather than asking them not to use their phones, I stopped the phones working. I want you to enjoy the experience of going out.”

When it comes to understanding the factors behind climate change, many scientists point to greenhouse gases – the main contributor being carbon dioxide. From upcycling the greenhouse gas to transforming CO2 into clean burning fuels, electrochemists and solid state scientists are tackling some of the most pressing issues in global warming.

But some researchers are now shifting that spotlight to black carbon (or soot) – the runner-up in factors causing the plant to warm, and one that is often overlooked.

Black carbon is typically created from the running of diesel engines, coal-burning plants, and open biomass incineration. It has been known from its negative impact on health, but it also absorbs light and mixes with water taken from clouds, creating devastating effects.

This from Popular Science:

Eliminating black carbon could stop about 40 percent of global warming. It’s not hard to “scrub” emissions at their source. And because soot only stays in the air for weeks, there would be a near-immediate decrease in the planet’s heating, buying us more time to replace fossil fuels with clean energy. But doing so would trigger a second type of climate change. When black carbon reaches the atmosphere, it’s already mixed with sulfur dioxide and other organic matter. Those particles actually reflect sunlight, causing a “global cooling” effect by preventing that solar radiation from penetrating the lower levels of the atmosphere.

Read the full article.

Researchers are looking to combat this catch 22 by isolating and filtering black carbon.

The system consists of a temporary tattoo (left) and a circuit board (right).Image: UC San Diego

The system consists of a temporary tattoo (left) and a circuit board (right).
Image: UC San Diego

A team of researchers form the University of California, San Diego has developed a flexible, wearable sensor that can accurately measure a person’s blood alcohol level from sweat and transmit the results wirelessly in real time.

The new development provides a continuous, non-invasive alternative to current alcohol level detection methods. Researchers state it also provides a more accurate reading than breathalyzers.

The device consists of a temporary tattoo, which adheres to the skin, induces sweat, and electrochemically detects alcohol levels. The sensor also incorporates a portable, flexible electronic circuit board, which connects to the tattoo and wirelessly communicates the information.

“Lots of accidents on the road are caused by drunk driving,” says Joseph Wang, ECS member and co-author of the study. “This technology provides an accurate, convenient and quick way to monitor alcohol consumption to help prevent people from driving while intoxicated.”

In addition to applications in law enforcement and medicine, Wang believes this device could potentially be integrated with a car’s alcohol ignition interlocks, or used by people to check their own alcohol level before getting behind the wheel.

(more…)

Researchers from Washington University in St. Louis have found a way to make dirty water drinkable with a light, affordable biofoam.

The newly developed bi-layered biofoam is made up of a bottom layer of bacteria-produced cellulose, which acts as a sponge and soaks up the dirty water. It then pushes that water to the top layer, which is comprised of graphene oxide. The graphene oxide then works to evaporate the filth, resulting in an end product of clean water.

“We hope that for countries where there is ample sunlight, such as India, you’ll be able to take some dirty water, evaporate it using our material, and collect fresh water,” says Srikanth Singamaneni, co-author of the study. “The beauty is that the nanoscale cellulose fiber network produced by bacteria has excellent ability to move the water from the bulk to the evaporative surface while minimizing the heat coming down, and the entire thing is produced in one shot.”

(more…)

Gerischer

Heinz Gerischer

Nomination Deadline: September 30, 2016

You are invited to nominate qualified candidate(s) for the Heinz Gerischer Award.

The Europe Section Heinz Gerischer Award was established in 2001 to recognize an individual or a small group of individuals (no more than 3) who have made an outstanding contribution to the science of semiconductor electrochemistry and photoelectrochemistry. The award consists of a scroll and a 2,000 EUR prize. The next award will be presented at the 232nd ECS Meeting in National Harbor, MD in October 2017. Explore the full award details on the ECS web site prior to completing the electronic application.

P.S. The Europe Section Heinz Gerischer Award is part of ECS Honors & Awards Program, one that has recognized professional and volunteer achievement within our multi-disciplinary sciences for decades. Learn more about various forms of ECS recognition and those who share the spotlight as past award winners.

Just over one year ago, the world’s first solar-powered plane set off on a journey around the world. Stocked with 17,000 solar cells, the so-dubbed Solar Impulse 2 looked to break a world record and highlight the feasibility of solar energy by flying the long-distance powered only by the sun.

The plane finally completed its journey, in spite of a few complications, on July 26 when it touched down in Abu Dhabi. The effort is seen by many as a pioneering example of the power or alternative energies.

However, this first of its kind plane did not take shape overnight. Solar Impulse 2 is the brainchild of Swiss pilots Bertrand Piccard and Andre Borschberg, who have labored over the machine for the better part of 13 years.

This from IFLScience:

To keep its power running, the plane flew above the clouds to collect sunlight during the day, before dipping down lower at night to save its batteries. And owing to being completely solar powered, it packed a modest top speed of just 75 km/h (47 mph).

(more…)

IEEENomination Deadline: September 15, 2016

Are you a student of electrochemical engineering and/or applied electrochemistry? Do you teach or mentor students within these areas? If the answer is ‘yes’ to either question, you are invited to nominate qualified student (s) for the following division awards.

IEEE Division Student Achievement Award: established in 1989 to recognize promising young engineers and scientists in the field of electrochemical engineering.

IEEE H. H. Dow Memorial Student Achievement Award: established in 1990 to recognize promising young engineers and scientists in the field of electrochemical engineering and applied electrochemistry. *This award was made possible by a gift from the Dow Chemical Company Foundation.

Award recipients will all be asked to present a lecture to the IEEE Division at the 231st ECS biannual meeting in May/June, 2017 in New Orleans, LA. Explore the full award details on the ECS web site, paying keen attention to the specific application requirements prior to completing the electronic application.

P.S. Industrial Electrochemistry and Electrochemical Engineering Division Awards are part of ECS Honors & Awards Program, one that has recognized professional and volunteer achievement within our multi-disciplinary sciences for decades. Learn more about various forms of ECS recognition and those who share the spotlight as past award winners.

Posted in Awards, Programs
Lithium battery

Image: ANL/Flickr

A new open access paper published in the Journal of The Electrochemical Society entitled, “Lithium-Ion Cathode/Coating Pairs for Transition Metal Containment,” finds a new cathode coating for li-ion batteries that could extend the technology’s lifespan.

According to Green Car Congress, the dissolution of transition metals is a major contributor to a li-ion battery’s expedited aging and degradation. However, this new study published in JES by ECS members David Snydacker, Muratahan Aykol, Scott Kirklin, and Christopher Wolverton from Northwestern University makes the case for a new, promising candidate that can act as a stable coating and limit the dissolution of transition metals into the lion electrolyte. That candidate is Li3PO4.

This from “Lithium-Ion Cathode/Coating Pairs for Transition Metal Containment”:

There are several distinct categories of strategies for limiting TM dissolution from the cathode. Electrolytes can be tailored to reduce reactivity with the cathode. Cathode materials can be doped to control the oxidation states of transition metals. This doping can be applied to the entire cathode particle or just near the surface. Cathode materials can also be covered with surface coatings to limit TM dissolution. Surface coatings can perform a variety of functions for different cathode materials. In this work, we evaluate the ability of coating materials to contain TMs in the cathode and thereby prevent TM dissolution into the electrolyte.

(more…)

Nanocarbons DivisionNomination Deadline: September 1, 2016

You are invited to nominate qualified candidate(s) for the Nanocarbons Division Richard E. Smalley Award.

The Nanocarbons Division Richard E. Smalley Research Award was established in 2006 to encourage research excellence in the areas of fullerenes, nanotubes and carbon nanostructures. The award consists of a scroll, a $1,000 prize and travel assistance to attend the 231st ECS biannual meeting in May/June, 2017 in New Orleans, LA for formal recognition. Explore the full award details on the ECS web site prior to completing the electronic application.

P.S. The Nanocarbons Division Richard E. Smalley Research Award is part of ECS Honors & Awards Program, one that has recognized professional and volunteer achievement within our multi-disciplinary sciences for decades. Learn more about various forms of ECS recognition and those who share the spotlight as past award winners.

An interdisciplinary team of researchers based out of the University of Illinois at Chicago believes they may have just changed the game in solar cell technology.

According to the recently published study, the team promises a solar cell that not only harvests energy, but cheaply and efficiently transforms atmospheric carbon dioxide into useable hydrocarbon fuel – all with a little help from the sun.

The new development differs from typical solar technology, where the cells convert sunlight into energy to be stored in batteries or other energy storage devices. Instead, the new research uses solar cells in a way similar to organic photosynthesis, just amplified.

By capturing dangerous greenhouse gases and converting them into alternative, clean fuels, the researchers believe a farm full of these “artificial leaf” solar cells could begin to significantly reduce the amount of carbon dioxide in the environment and help shift the energy landscape toward more green alternatives.

“The new solar cell is not photovoltaic—it’s photosynthetic,” says Amin Salehi-Khojin, senior author of the study. “Instead of producing energy in an unsustainable one-way route from fossil fuels to greenhouse gas, we can now reverse the process and recycle atmospheric carbon into fuel using sunlight.”

(more…)