A joint venture between two Japanese companies has embarked on building the world’s largest floating solar project.

The project is estimated to harvest 16,170 megawatt hours per year – enough to power around 4,970 households.

Not only will the floating solar farm – which will consist of 50,904 panels – produce a large amount of renewable energy, it will also play a major role in offsetting over 8,000 tons of carbon dioxide emissions annually (the equivalent of 19,000 barrels of oil).

Japan is making the move to “floatovoltaics” due to the lack of open land suitable for solar farms, but plentiful water surfaces. Proponents believe floating solar farms will be cheaper to produce than their land counterparts due to less strict regulations held on water surfaces.

Energy comes in many forms. From solar to wind, there are an abundance of energy technologies available today. But one village in Indonesia is using on very different, very unique product to power their homes: Tofu.

The remote Kalisari village in Indonesia has a vibrant tofu producing industry (over 150 tofu businesses, to be exact). To produce this tofu, a lot of water is required. To make just over two pounds of tofu, some nine gallons of water is required. That water, inevitably, transforms into wastewater and it typically tossed into a nearby drainage system.

But the village has found a way to make that waste reusable in the form of energy. By treating the wastewater with a specific type of bacteria, biogas can be produced. The clean, renewable energy can be pumped directly into households.

(more…)

In late 2015, a team of Cambridge University researchers led by ECS member Clare Grey, detailed research in the journal Science on the path to the “ultimate” battery. According to the study, the researchers stated they had successfully demonstrated how to overcome many of the problems preventing the theoretically promising lithium-air battery from being commercially viable.

The key component to this research relies on a highly porous, “fluffy” carbon electrode made from graphene. The researchers cautioned that although the preliminary results were very promising, much work was yet to be done to take lithium-air batteries from the lab to the marketplace.

However, the research got many scientists in energy science and technology talking. Like all groundbreaking results, there has been much discussion and some controversy over the research published by Grey and her team.

(more…)

Two ECS members from Drexel University have recently been awarded for their exemplary work in the sciences.

Yuri Gogosti, Fellow of ECS and advisor of the Drexel ECS Student Chapter, has been awarded the 2016 Nano Energy Award. The award, presented by the journal Nano Energy, recognizes outstanding research in the field of nano energy, whose work reflects the interdisciplinary nature of the field and helps solves major energy problems facing society.

Gogostsi’s work is highly regarded in the scientific community. Among his most notable accomplishments, Gogotsi was a member of a team that discovered a novel family of two-dimensional carbides and nitrides, which have helped open the door for exceptional energy storage devices. Additionally, Gogotsi’s hand in discovering and describing new forms of carbon and the development of a “green” supercapacitor built of environmentally friendly materials has advanced the field of energy technology.

Ekaterina Pomerantseva, ECS member and advisor of the Drexel ECS Student Chapter, has been awarded a three-year $360,000 National Science Foundation Division of Materials Research grant for her project, “Advanced Electrochemistry of Na-ion Battery Cathodes Through Chemically Controlled Materials Synthesis.”

Her work looks to address some of the current barriers prevention Na-ion batteries from competing with their Li-ion cousins. Pomerantseva believes that the grant money could help develop sustainable energy storage that is cheaper, reliable, and environmentally friendly – opening the door to next generation energy storage systems and new possibilities for grid storage.

In the field of batteries, lithium is king. But a recent development from scientists at the Toyota Research Institute of North America (TRINA) may introduce a new competitor to the field.

The researchers have recently developed the first non-corrosive electrolyte for a rechargeable magnesium battery, which could open the door to better batteries for everything from cars to cell phones.

“When magnesium batteries become a reality, they’ll be much smaller than current lithium-ion,” says Rana Mohtadi, principal scientist and ECS patron member through TRINA. “They’ll also be cheaper and much safer.”

Magnesium has long been looked at as a possible alternative to lithium due to its high energy density. However, these batteries have not seen much attention in research and development due to the previously non-existent electrolyte. Now that the electrode has been developed, the researchers believe they will be able to demonstrate the value of this system.

(more…)

May the 4th be with you

Whether you’re a Star Wars superfan or find yourself lost when the conversation turns to discussions of the feasibility of the Death Star, you can probably identify the epic space series’ iconic lightsaber. The lightsaber has become one of the most recognizable images in popular culture, but is it purely fiction or could it be a reality?

According to the Star Wars books, lightsabers are pretty complex devices but essentially boil down to a few key elements: a power source and emitter to create light, a crystal to focus the light into a blade, a blade containment field, and a negatively charged fissure. In the Star Wars galaxy, a lightsaber creates energy, focuses it, and contains it.

But that’s fiction and those ideas are not in line with current science and technology. So how could we build a lightsaber with the tools we have today?

Many people look initially to laser technology when discussing a practical lightsaber. It’s unrealistic to say that light could be the source of the blade seeing as light has no mass (creating a pretty insufficient weapon), but lasers could be an alternative. It may seem contradictory to say that lasers could be the blade in a lightsaber when lasers are essentially light focused to a very fine point, but as Looper puts it, light is to a laser what a tree is to paper.

(more…)

When we discuss energy, we usually talk about how to harness it or how to store it. But what about conserving the energy we’re wasting every day?

A recent study out of the University of Texas uncovered just how much energy we’re wasting through the excessive waste of food. For every four meals that make their way to our plates, an equivalent of one to two is discarded. When examining the energy used to grow, irrigate, fertilize, and transport that food — the amount of energy wasted begins to add up. Watch the video.

Researchers at the University of California, Irvine may have just developed the ever-lasting battery.

A recent study, published in ACS Energy Letters, details a nanowire-based battery material that can be recharged hundreds of thousands of times – making more realistic the idea of a battery that would never need to be replaced.

Potential applications for the battery range from computers and smartphones to cars and spacecrafts.

Highly-conductive nanowires have always been thought appropriate for battery design, but were held back by the fact that their fragility causes them to breakdown after multiple charging cycles. By coating a gold nanowire in a manganese dioxide shell and encasing the assembly in an electrolyte, the researchers have turn the frail structure into something that has almost infinite recharging capabilities.

Mya Le Thai, a doctoral candidate, led the charge on the research – cycling the tested electrode up to 200,000 times over a three month period without loss of capacity or damage to the nanowire.

“Mya was playing around, and she coated this whole thing with a very thin gel layer and started to cycle it. She discovered that just by using this gel, she could cycle it hundreds of thousands of times without losing any capacity,” said Reginald M. Penner, chair of UC Irvine’s chemistry department and ECS member. “That was crazy, because these things typically die in dramatic fashion after 5,000 or 6,000 or 7,000 cycles at most.”

Thai believes that this study shows that nanowire-based batteries could be commercially viable, and potentially the next big break in battery technology.

Rooftops can provide more than shelter from the elements; they may also provide a goldmine of untapped energy production.

The U.S. Department of Energy’s National Renewable Energy Laboratory (NREL) recently issued a report stating that rooftop solar panels have the potential to power nearly 40 percent of the U.S.

“It is important to note that this report only estimates the potential from existing, suitable rooftops, and does not consider the immense potential of ground-mounted PV,” co-author of the report Robert Margolis said. “Actual generation from PV in urban areas could exceed these estimates by installing systems on less suitable roof space, by mounting PV on canopies over open spaces such as parking lots, or by integrating PV into building facades. Further, the results are sensitive to assumptions about module performance, which are expected to continue to improve over time.”

Essentially, solar panels could have limitless possibles. However, land is a precious commodity. Roofs, however, provide a space that typically goes unused to generate a huge amount of power for the U.S.

People across the globe are looking toward renewable solutions to change the landscape of energy. But what happens when the sun goes down and the wind stops blowing? In order to guarantee green energy that is consistent, reliable energy storage systems are critical.

“Currently, single systems of photovoltaic cells which are connected together — mostly lead-based batteries and vast amounts of cable — are in use,” said Ilie Hanzu, TU Graz professor and past member of ECS. “We want to make a battery and solar cell hybrid out of two single systems which is not only able to convert electrical energy, but also store it.”

The idea of a battery and solar cell hybrid is completely novel scientific territory. With this project, entitled SolaBat, the team hopes to develop a product that has commercial applications. For this, the scientists will have to develop the perfect combination of functional materials.

“In the hybrid system, high-performance materials share their tasks in the solar cell and in the battery,” Hanzu said. “We need materials that reliably fulfill their respective tasks and that are also electrochemically compatible with other materials so that they work together in one device.”

(more…)